DIY Smart Key Fob Replacement Kit Compatible with Honda Accord 2018 2019 2020 2021 2022 Keyless Entry Remote Control Replace FCC ID: CWTWB1G0090 4A Chip 5 Button

Product description

This key replacement kit applicable model years are as follows

This item only supports Push start Button vehicles, and it doesn’t support regular keys.

Compatible With:

2018-2020 Honda Accord

Button Funtions：Unlock ，Lock ， Trunk Release，Search Button，Remote Start.

Wear ResistantHigher-ResponsivityComfort & Convenience

Note: Chip is 4A, as you’ll need to choose the operation type based on it.

STEP 1：Check model year of your car is suitable for our compatibility list；

STEP 2： Verify the FCC ID of your OEM key is the same as ours. (You can check the key’s back or open the case to find FCC ID & details inside.)

STEP 3：You can ask the dealership or seller if unknown.

Our Key Information:

FCC ID: CWTWB1G0090part number: 72147-TVA-A01Chip:4A & Frequency: 433 MHz

PACKAGE INClUDED：

x1 Remote Key Fobx1 DIY Tool（With manual

Note: Vehicle voltage must be 13V above, otherwise extra power supply is needed. Check that the supply voltage is normal.

Two methods are referenced below:

It can be tested with specialized equipment.Start the vehicle and see if it works properly.

If your car has a DTC, then you first need to erase the error code for the device to work properly, our device has a function to erase the error code.

If the tool you purchased is working properly, then you can refer to the following steps

Step 1: check that the vehicle is in good condition (e.g., voltage is normal and no DTC).Step 2: the OBDII cable port end plugs into the car’s OBD port.Step 3: Select the corresponding model and year.Step 4: Follow the device’s prompts.Finally, test the key to see if it works.

Upgrade Guidelines

When you use it in the process of certain problems or failures, please take a picture or other ways to record, so that we can follow up to help you solve the problem.

You may meet the following problems：

Vehicle Linking ErrorOperating ErrorThe EZK911 doesn’t power upOther problems

So when you have any problem in the process of using, please provide as much information as possible to make it easier for us to understand.

Fitment: It is compatible with 2018 2019 2020 2021 2022 Honda Accord Remote control Key. This item only supports Push start Button vehicles, and it doesn’t support regular keys. Please check the “Amazon Confirmed Fit” bar at the top of this page before purchasing to ensure this product is compatible with your vehicle
Reference Number: Replacement for FCC ID: CWTWB1G0090. Note: Chip is 4A, as you’ll need to choose the operation type based on it. PART NUMBERS: 72147-TVA-A01. IC:1788F-FWB1G0090. Please match the FCC ID and chip, button etc. information carefully before purchase
Do It Yourself Solution: You can set up your key fob completely at home without professional help or installation—saving money and valuable time. The process is simple: plug the matching OBD II tool into your car’s diagnostic port, follow the clear on-screen instructions, and complete the setup in minutes. With a detailed illustrated manual included, you can get started quickly and easily
Package Included: x1 Remote Key Fob, x1 DIY Tool. Each remote key comes supplied with a battery, fully installed and pre-tested to ensure quality. Warning: The key fobs are not waterproof. We recommend performing the setup indoors or in a shaded area like a garage, as the screen may be difficult to read in direct sunlight
Please Note: Before hook up, please make sure that the voltage of the vehicle battery is sufficient to avoid the system reporting error due to power cut halfway.Upgrade Guidelines(Try it when have any issue). Please feel free to leave a message if you encounter any problems

Product summary

shift
+
opt
+
D