Door Access Control Keypad, Stand-Alone Password RFID Reader+5PCS Keyfob Keychain for Entry Home Security Access Controller

Product description

M203-ID 125Khz Access Control Machine

Model Number M203-ID Card type EM Card:125Khz Reading distance 1-5cm Security Mode Fail Safe with Signal Door opening mode Card or Password User capacity 1000 Smart home platform None Operating temperature 0℃—60℃ Operating voltage DC 12V±10% Current <100MA

Product Features

Classical standalone access control adopts high quality plastic material. Based on low power consumption and low cost. Suitable for household, office and department.

High quality and high securitySensitively and response quicklySupport 1000 standard usersSupport card, password, password plus card to open the doorHas a door bell buttonClassical Appearance with useful functionDoesn’t need to connect on the computer, can works aloneApplication: Home/ hotel/ office/ department / apartment etc

How to reset to Factory Programming Password(123456)

Step1, Turn off power and connect OPEN and GND terminal.Turn on power thenthere is 3 long beeps with green and red light flashing alternately.Step2,Turn off power,disconnect OPEN and GND terminal. Turn on power again. Initializing Programming Password is completed.

Use ID explanation

User ID is 4-digit number from0001 to 9999. There is no User ID for the users added by command. Perform command to clear all User ID.

How to change PIN

Swipe card or press PIN to unlock within 5s press [#] for3suntil the green light flash fast, then press [new PIN#new PIN#], the new PIN changed successfully with a long beep.

Authentication Mode for Card& PIN function

Setp1, When Authentication Mode is [Card or PIN] (factory default), according to the step 3.4 to configure the PIN of the card.Setp2, Press [#Programming Password#603#] to configureAuthentication Mode to be [Card &PIN].Setp3, Swipe user’s card with green light fast flash then input [PIN#]with green light normally ON, the door opened successfully.

Door open function description:

When the credit card or password is normally opened, press the 7, 9 digit key to keep the door open. When the door is always open, only once the credit card, password, or the door button is opened again, the exit is always open.

Digital Touch Panel

Digital Touch Panel: Simple and convenient to operate; users can input commands via the touchscreen.ID Card Sensor Function: Supports ID card identification for door opening.Doorbell Function: Built-in doorbell button allows visitors to call residents inside.Number Keypad (1-9, *, 0, #): Supports password input or other command operations for password-based door opening or system settings.

This access control system supports both card swiping and password verification methods, and features touchscreen operation and a doorbell function, making it suitable for access control in offices or communities.

Support 1000 Standard Users

This access control device supports up to 1,000 standard users, offers two methods for unlocking—card swipe or password entry—and can directly drive electric locks, thereby enabling convenient and secure access control management.

Precision Internal Component

This access control device features a stylish housing design and is equipped with a sleek keypad panel, allowing for door access via password entry. Internally, it houses precision components and a proprietary smart chip, enabling rapid proximity card reading and accommodating the needs of up to 1,000 users. Overall, the unit is characterized by its reliability and practicality, making it ideally suited for access control scenarios requiring either card-based or password-based verification.

Application Scenarios

This access control machine is made of ABS material and supports both RFID card unlocking and password unlocking. It features a doorbell function, sensitive sensing capabilities, and a management capacity of up to 1,000 users. It is suitable for places that require medium to large-scale personnel access control, such as corporate office areas, residential unit doors, apartments, small factories, or office buildings, and can meet daily security management and visitor call needs.

Wiring Diagram

Power Interface: Provides 12V and GND (ground) terminals for power connection.Electric Lock Control Interface: Includes NC, COM, and NO terminals for connecting to automatic doors or gates. NC and NO correspond to normally closed and normally open connections, respectively, while COM is the common terminal.Exit Button Interface: Labeled OPEN, used to connect an external exit button.PUSH is the unlock signal line.Doorbell Interface: Labeled BEL+ and BEL-, used to connect a doorbell.Wiegand Input/Output Interface: Labeled WG26 input/output, with terminals 12V, GND, DO, D1, NC, COM, and NO. Used to connect a Wiegand card reader or as a Wiegand signal output; however, this interface is only applicable to certain models.

Multiple Access Ways：The access control keypad integrated machine support 1000 users capacity, Support swipe card or password to open the door. Can add users and delete users as your requirement.used for automatic gate opener、magnetic lock、electric gate lock ect.
Come with 5PCS Keyfobs Keychains：Each card pre-programmed with a unique number, which is printed on the keyfob. Only the keyfob authorized by the access control system then can be open the door.
Reliable and practical：Shell is made of ABS fire retardant, panel hard shell rubber film, which has good fire retardant effect, Full programming from the keypad, don’t need to connect to computer. Power off data protection.
Strong Flexibility and Extendibility：Working with DC12V power supply. Can directly drive the electric lock. Support external doorbell. Support the switch for opening the door.
Widely Used：Access control system able to deterring unauthorized personnel, Suitable for apartment, office, access control, off-limit area, hotel locks, school campus access, identification, parking lot entry, etc.

Product summary

shift
+
opt
+
D